Page 1 of 1

Water Retention with Zero Order Reaction

Posted: Sat Oct 14, 2023 1:26 pm
by AndrewGonzales
I have one of the equations to solve this problem but how would I determine the slope of the line in [A] = [A]o - kt? I'm also familiar with rates of change in calculus, etc, it's just been a while since I've taken this.


3-29 from Textbook. A strain of bacteria has been isolated that can cometabolize
tetrachloroethane (TCA). This strain of bacteria can be used for the bioremediation of
hazardous-waste sites contaminated with TCA. Assume that the biodegradation rate is
independent of TCA concentration (i.e., the reaction is zero order). In a bioreactor it is
observed that the rate for TCA removal was 1 µg/L-min. What water retention time
would be required to reduce the concentration from 1 mg/L in the influent to 1 µg/L in
the effluent of a reactor? Assume the reactor is completely mixed.

Re: Water Retention with Zero Order Reaction

Posted: Sun Oct 15, 2023 4:14 am
by ChenBeier
I would say its 1000 min.
1μg/(l min.) means for 1 mg/l = 1000 μg/l 1000 min. = 16.66 h necessary.

Re: Water Retention with Zero Order Reaction

Posted: Thu Oct 19, 2023 12:08 am
by ulanything
Can your explain more details?

Re: Water Retention with Zero Order Reaction

Posted: Thu Oct 19, 2023 2:21 am
by ChenBeier
Reaction Zero order the slope is 0.

https://chem.libretexts.org/Bookshelves ... _Reactions

Re: Water Retention with Zero Order Reaction

Posted: Thu Dec 28, 2023 9:13 pm
by tynsaraso90
I do not really understand...

:roll: :roll: